How to install a kitchen hot and cold faucet

Are you worried about the small water outlet range of the faucet and unable to clean every corner of the sink? Are you depressed because of the problem of the water outlet position of the faucet? Xiaobian Aihui brought you a new product in the faucet industry today - pull Type faucet, let's open a new world in the kitchen together!
Ordinary faucets are very simple and can be used directly by screwing on them. The pull-out faucet is a popular Internet celebrity product recently. Compared with traditional faucets, the advantage of the pull-out faucet is that it can be pulled out, generally 40-60 cm, which expands the flushing area. For example, the corners that cannot be flushed by the sink can be easily flushed, which is very convenient.
The installation of the pull-out faucet is also very convenient. To install the joint, install all the gaskets in it, wrap it with raw tape and then tighten it firmly. The other is the gravity ball. This thing is a plastic-wrapped iron ball, which is relatively heavy. The hose can ensure that when we pull the faucet, it can be retracted smoothly. Therefore, pay attention to the installation position when installing, generally it can be installed in one-third of the way.

How to install the pull-out faucet?
First check the accessories, then take out the switch body of the faucet, unscrew the nut and washer, then insert it from the right mounting hole, repeat the main body according to the process just now, and then insert the faucet body from the left mounting hole;
Thread the main body of the faucet and the split anti-skid ring and gasket from the bottom end, and then screw on the nut. Remember not to put these small accessories in disorder, it will be troublesome if you lose them!
Take out the sealing rubber gasket and screw it into the mounting hole together with the small nut at the end of the short shower hose;
The last step is to connect the two hot and cold water inlet pipes, and then connect the water inlet pipes to the angle valve.

We all know that kitchen faucets are divided into hot and cold water. Many friends have bought a faucet home but don’t know how to install it. Let’s learn how to install a kitchen faucet with hot and cold water. I hope it will be helpful to everyone.
First of all, let's take a look. There are several types of kitchen faucets: there are single-cooling, hot and cold mixed, and single-cooling is very simple. It is directly installed on the water pipe on the wall. If it is a mixture of hot and cold, it should be clearly distinguished on the wall. The hot and cold water pipes are generally hot on the left and cold on the right.
The installation of the single hole kitchen faucet:
Because the kitchen faucet is used frequently, it requires stability. Plus being turned around, it is easy to loosen, so the lock nut must be tightened. At present, there are some faucets on the market that are fixed with a screw pipe and a larger nut. This effect is very good. If the problem of water removal and pulling can be solved, it will be a popular trend in the future.

Tools to prepare before installation:
Before installation, check whether the supporting parts are complete. Common faucet accessories include: water inlet hose, rubber gasket, shower head, water removal, kidnapper, decorative cover, etc.
The single cold water faucet installed on china pullout kitchen faucet the stainless steel sink basin only needs to be fixed and then connected to the 4-point water inlet pipe at both ends, and one end is connected to the angle valve and the other end is connected to the faucet base. .
When purchasing a single-lever basin faucet, you should pay attention to the diameter of the water outlet. At present, most of the water in the market is filled with hard pipes. Pay attention to reserve the height of the water pipe, which is about 30 degrees from the basin downwards. When installing, be sure to select a special angle valve, and the angle valve must be fixed with the hot and cold water pipes of the wall. If there is a distance between the angle valve and the water pipe on the faucet, it is necessary to purchase a special pipe to lengthen the link. Do not use other water pipes to connect, otherwise it will leak and fall off due to high water pressure. If the inlet pipe is too long and exceeds the outlet pipe, just cut off the excess. Note: Do not bend the hose hard to 90 degrees or more. When installing the basin to drain, please don't forget to buy the small interface of the faucet (the faucet is shorted). The water pipes buried in the wall must be flushed in advance before installation.